Home › Choosing a Reservoir vs. Plumbed Ice Maker for Small Spaces

Choosing a Reservoir vs. Plumbed Ice Maker for Small Spaces

Updated 2026-09-21 · Ice Maker Guide

Ice Maker Guide is reader-supported. As an Amazon Associate we earn from qualifying purchases made through links on this page — at no extra cost to you.

Why the Reservoir vs. Plumbed Debate Matters

When you’re limited to a small kitchen, dorm, or mobile setup, choosing between a reservoir‑based or plumbed ice maker can feel like a big decision. The primary keyword—reservoir vs plumbed ice maker for small spaces—captures exactly what you need to decide. A reservoir model pulls water from a built‑in tank, while a plumbed unit taps into your home or RV water line. Each has trade‑offs in space, maintenance, and initial cost. Let’s break it down.

Space and Installation: The Core Difference

Reservoir systems are self‑contained. They sit on a counter or table, use a 5‑ to 8‑quart tank, and require only a power outlet. Plumbed units need a 1/2‑inch or 3/4‑inch pipe connection, a nearby outlet, and a bit of plumbing skill. For a tiny apartment, the reservoir’s plug‑and‑play nature means you can place the unit wherever you have a surface. Plumbed models, while offering a cleaner look, can’t be moved without reconnecting the water line.

Our Top Pick
Top-Rated Ice Makers
Countertop nugget and cube ice makers that make fresh ice in minutes — perfect for home, parties, RVs and boats, no plumbing required.
Check Price on Amazon →

In a small space, the reservoir’s footprint is often 20–25 inches wide and 12 inches deep—compact enough for a 2‑by‑4 counter. Plumbed units are similar in size, but you must factor in the length of pipe needed to reach the faucet or a water source.

Output, Speed, and Capacity: How Much Ice Do You Need?

Both types can produce 1–2 pounds of ice per hour, but the first batch time differs. A reservoir model typically delivers its first cube or nugget in 6–8 minutes; a plumbed unit can be faster, 4–6 minutes, because water is constantly supplied.

If you host parties or need large ice quantities for a boat, a plumbed unit may edge out. For casual use—home bar, RV, or small kitchen—the reservoir’s capacity is usually sufficient.

Cleaning, Descaling, and Water Quality

Both systems need monthly cleaning. Reservoir models allow you to drain the tank and rinse it easily; plumbed units require flushing the internal lines. The water source matters: a reservoir can use filtered tap water or bottled water, while a plumbed unit relies on your house supply, which may contain chlorine or minerals that affect taste and buildup.

Descaling times are similar—about 30 minutes with a vinegar solution. However, the reservoir’s smaller volume means the solution clears faster, reducing downtime.

Portability and Power: RV, Boat, and Outdoor Use

For RVs and boats, the Top‑Rated Ice Makers — Countertop nugget and cube ice makers that make fresh ice in minutes — perfect for home, parties, RVs and boats, no plumbing required line is a natural fit. These units run on 110‑V AC and are designed to be moved without plumbing. They’re lightweight (5–7 lbs), have a 6‑quart reservoir, and produce 1–2 pounds per hour, making them ideal for campfires or tailgates.

If you’re in a fixed location and can afford the extra installation step, a plumbed model can run 24/7 and provide more ice, but you’ll lose the ability to relocate the machine.

Cost and Value: Initial vs. Long‑Term

Initial purchase price for a reservoir unit ranges from $150 to $300, while a plumbed unit can start around $250 and climb to $500 when you factor in plumbing supplies and labor.

Long‑term, reservoir models use a refillable tank that you can fill with bottled water for cleaner ice, but you’ll need to purchase water periodically. Plumbed units use tap water continuously, saving on water costs but potentially increasing utility bills if you run it at high capacity.

Choosing the Right Model for Your Space

• Small kitchen or apartment: Reservoir, 5‑quart tank, 8‑inches deep.

• Home bar or party area: Reservoir or plumbed, depending on space for a pipe.

• RV, boat, or outdoor event: Reservoir, 6‑quart tank, no plumbing.

Remember to check the latest listings for current specs and pricing, as models update frequently. The featured product line offers both nugget and cube options, so you can pick the texture that suits your taste.

FAQ

What is the difference between nugget and cube ice in these machines?

Nugget ice is chewable, softer, and melts faster—great for cocktails. Cube ice is harder, lasts longer, and is better for drinks that need to stay cold without diluting. Many reservoir models offer both options in separate units.

Can I use bottled water in a plumbed ice maker?

Yes, but you’ll need a dedicated water line or a tap that can be connected to a bottle. Most plumbed units are designed for tap water only, so using bottled water may require a custom adapter.

How often should I descale a reservoir ice maker?

Descale every 3–4 months if you use hard tap water. If you use filtered or bottled water, the schedule can stretch to 6 months.

Ready for Fresh Ice Anytime?
Top-Rated Ice Makers
Countertop nugget and cube ice makers that make fresh ice in minutes — perfect for home, parties, RVs and boats, no plumbing required.
Check Price on Amazon →